How To Install Ap Trap On A Sink

With your pedestal sink on the wall, you can install the P-trap. The U-shape of this piping is the trap that retains enough water to prevent sewer gases from entering the bathroom. Y'all can adapt the P-trap, sliding information technology up and downwards on the pipe that leaves the sink drain. The other end of the P-trap tin can slide into and out of the fitting on the wall.

If the P-trap doesn't marshal with the bleed that comes out of the wall, you may accept to cut the tailpiece that protrudes from the pop-upwardly assembly to install the P-trap.

Follow these steps to install the P-trap:

1. Slide the brusk side of the P-trap onto the tailpiece that drops down from the sink drain. Move the P-trap up or down to align the trap arm with the opening in the wall.

   Use a hacksaw to cut the tailpiece if you tin't move the P-trap higher upward the tailpiece and the trap arm is below the wall drain plumbing equipment. Purchase a longer tailpiece if the P-trap lies above the wall drain fitting when fastened to the stop of the tailpiece.

2. Take the lower part of the P-trap apart and insert the trap arm into the wall bleed fitting as far as it volition become.

3. Pull the trap arm out of the wall fitting until information technology lines up with the top U-shaped portion of the trap.

   If the trap arm comes completely out of the wall earlier it can be attached to the trap, purchase a longer trap arm. If the trap arm is in the wall plumbing equipment equally far as it will go and extends by the U-shaped part of the trap, cut information technology with a hacksaw.

4. Insert the trap arm back into the wall drain, move it into alignment with the trap, and thread on (simply don't tighten) the skid nut.

5. After y'all've joined the trap parts together, tighten the slip basics on the tailpiece and the wall drain fittings.

Well-nigh This Article

This commodity tin be found in the category:

• Sinks & Garbage Disposals ,

Source: https://www.dummies.com/article/home-auto-hobbies/home-improvement-appliances/plumbing/sinks-garbage-disposals/how-to-install-the-p-trap-under-a-sink-184740

Posted by: wilsonters1972.blogspot.com

Share this post